LT-168W is an 3G intelligent waterproof on-board diagnostic device compatible with passenger and commercial vehicles, it features plug-and-play technology, could diagnostic info from vehicle ECU and capture location data, then send them to backend server for real-time remote diagnostic and tracking purpose.
Easily install.
Can report the real-time location according the time interval ,distance,heading change.
Including speeding, hard acceleration, hard deceleration etc.
Remote power off the engine via connect a relay.
Statistics the trip fuel consumption.
Read engine data and diagnostic trouble codes.
Statistics the trip mileage.
When the device is removed, it will send out an alarm to server.
Size | 114mm (L) x 62mm (W) x 34mm (H) | |
Weight | 200g | |
Protection | IP67 waterproof | |
Interface | OBD interface: 16 pin standard OBD II | |
SIM card slot | Micro SIM, Push-Push Type | |
Data transmission | Packet data (GPRS or HSPA) and SMS | |
Positioning method | GPS | |
Storage | 2MB FLASH, up to 24,000 GPS data storage | |
OBD protocol | SAE J1850 PWM SAE J1850 VPW ISO 9141-2 ISO 14230-4 ISO 15765-4 SAE J1939 SAE J1587/J1708 |
|
Working Voltage | 9-36VDC | |
Working Current | Max.: <200mA@13.8/27.6VDC Average: <150mA@13.8/27.6VDC Sleep mode: <10mA@12/24VDC |
|
Backup battery | 3.7V/160mAH | |
GPS | Channels: 66 Sensitivity: -165dBm Accuracy: 5m CEP Time to first fix: Cold start: <30s (typ.) Hot start: <1s (typ.) |
|
Cellular | Frequency: GSM/GPRS: 850/900/1800/1900MHz UMTS/HSPA: 800/850/900/1900/2100MHz Network protocol: Embedded TCP/IP stack Sensitivity: -110dBm@UMTS -109dBm@850/900MHz -108dBm@1800/1900MHz Output power: Class 4 (2W, 33dBm)@850/900MHz Class 1 (1W, 30dBm)@1800/1900MHz Class 3 (0.25W, 24dBm)@UMTS Certification: CE, GCF, FCC, PTCRB, IC, AT&T |
|
6-axis IMU | Driving behavior detection | |
Buzzer | System status/Alarm indication | |
Cellular Antenna | Internal | |
GPS Antenna | Internal | |
Accessories | Configuration cable OBD II extension cable 9-Pin deutsch wiring harness 6-Pin deutsch wiring harness Power cable |
|
Working Temperature | -30℃ ~ +70℃ | |
Storage Temperature | -40℃ ~ +85℃ | |
Humidity | 5%~95%(no fog) |